Description
| • | Proudly Designed and Made in USA |
| • | High Profile P.O.I® (Precision Optics Interface) Rings Have a 33mm Center Height to Fit Optics with a 1″ Tube, and up to a 65mm Outer Objective |
| • | The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings – a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations |
| • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width |
| • | Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms |
| • | Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize |
| • | UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size |
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb. |
|
Reviews
There are no reviews yet.