ARMASPEC Stealth™ Recoil Spring – SRS™- AR-15

Description

FEATURES:

• Drop-In Replacement for Standard Buffer and Spring
• Reduce Felt Recoil
• Keep the Buffer Spring from Rubbing Against the Inner Wall of the Buffer Tube
• Buffer Mass is Designed to Stay Under Constant Tension Against the Bolt Carrier
• Rubber O-Ring on the Head of the Buffer Mass Prevents Metal on Metal Contact
• Made in the U.S.A.

SPECIFICATIONS:

• Length: 7.18″

Equivalent Weight:

C: 3.3 oz.

Actual Wight – Complete System (New Version with Stainless Steel Weight):

• C: 6.2 oz.

COMPATIBILITY:

• AR-15 with Carbine-Length Buffer Tube
• AR-10 Version is Available, Please Find Under AR-10 Parts.
• Most Bolt Carriers Have a Rear Opening of Over .60″, there are a Couple of Bolt Carriers in the Market-Place that Have a Rear Opening of Under .60″ and Will Not Function with the SRS.

INSTALLATION AND MAINTENANCE:

• Before Installing the Recoil Spring, it is Always a Good Idea to Retighten the Screws Using Either Using Two 3/32 Hex Key and Fully Tightening Both Screws at the Same Time or Using One 3/32 Hex Key and Using the Hole In the Rod for Leverage.
• The Screws Should be Re-Tightened Every Time Maintenance is Performed on the Firearm.
• The Polymer Bumper Goes Towards the Rear of the Firearm and the Weight Mass with the O-Ring Goes Towards the Bolt Carrier.
• The SRS can be Installed with or Without the Buffer Retainer. Most People Run the SRS Without the Buffer Retainer for Ease of Maintenance.
  The SRS™ Comes with Red LOCTITE on the Front Metal Stop and Blue LOCTITE for the Bottom Bumper, When Reassembling We Recommend Reapplying LOCTITE.

Additional information